Serving the Shreveport area  ·  (318) 666-5827  ·  Open Mon-Sun 7am-7pm
📞 (318) 666-5827 Free Quote

Metal Roofing in Plain Dealing, LA (71064) · Local Professionals

Shreveport Metal Roofing · Fast response in Plain Dealing and the Shreveport area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+227Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Plain Dealing is a small town where the lots are wide, the trees are tall, and most roofs have seen a few decades of Louisiana weather. From the older homes near the downtown block by the railroad tracks to the farm buildings and ranches spread out along Highway 157 and Highway 2, metal roofing just makes sense here.

Homeowners in Plain Dealing (71064) call Shreveport Metal Roofing because we understand the local conditions: the red clay that holds water after a storm, the pine needles that pile up in valleys, and the hail that comes with spring supercells. We are based in Shreveport and serve Plain Dealing and the surrounding areas, and we are fully insured for your peace of mind.

Metal Roofing in Plain Dealing (71064)

Plain Dealing sits in northern Caddo Parish, and the terrain here is mostly flat to gently rolling, with a mix of sandy loam and that heavy red clay that shows up after a good rain. Many properties have mature pines and oaks that drop limbs and needles, which can clog gutters and trap moisture against shingles. The housing stock ranges from older wood-frame homes near the center of town to brick ranches and farm buildings on larger tracts. Access can be tight on some of the smaller in-town lots, and we often need to plan for equipment placement carefully. We also see a lot of corrugated and ribbed panel roofs on barns and shops, and those need proper fasteners and flashing details to handle our wind and rain.

Our team has worked on metal roofs across Shreveport and the surrounding areas, including Plain Dealing. We know the local building department requirements and can help you navigate permits for a replacement or new installation. Whether it is a small repair on a farm shed or a full standing seam installation on a home, we bring the same attention to detail.

Our services in Plain Dealing

How a Job Works in Plain Dealing

Step 1: You call us at (318) 666-5827 or request a free estimate online. We schedule a time to come out to your Plain Dealing property and assess the roof. We look at the current condition, check for leaks, and discuss your options. We provide a written estimate before any work begins.

Step 2: Once you approve, we schedule the work. For a full replacement, we pull the necessary permits with the local building department. On many Plain Dealing properties, we need to coordinate access for delivery trucks and dumpsters, especially on narrower streets or long driveways. Our crew is experienced with tight lots and works efficiently to minimize disruption.

Step 3: After the work is done, we do a thorough cleanup, including magnet sweeping for nails. We walk the property with you to make sure you are satisfied. We leave your yard and driveway clean, just as we found it (or better).

Pricing for metal roofing in Plain Dealing depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical home, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering going over existing shingles, that starts at $7 per square foot, but keep in mind local codes limit the number of layers. Repairs start at $450, and screw replacement or re-fastening starts at $750. For farm buildings, corrugated and ribbed panel roofing starts at $5.50 per square foot. We offer free estimates, so call us at (318) 666-5827 to get a precise quote for your Plain Dealing property.

My Plain Dealing farm shop has corrugated metal roofing that is starting to leak at the fasteners. Can you repair it without replacing the whole roof?
Yes, we can often repair corrugated and ribbed panel roofs by replacing the failed fasteners and sealing the penetrations. If the panels are still in good shape, a screw replacement and re-fastening service starts at $750. We will inspect the roof and give you an honest assessment of whether a repair or replacement makes more sense.
A storm just knocked a limb onto my roof in Plain Dealing. Do you offer emergency repairs?
We do offer storm and wind damage repair, and we provide free inspections for storm damage. Call us at (318) 666-5827 to schedule a prompt assessment. We can tarp or secure the roof if needed and provide a detailed estimate for the repair.
How much does a metal roof repair typically cost in Plain Dealing?
Metal roof repairs start at $450, but the final cost depends on the extent of the damage, the type of metal, and accessibility. Leak repairs also start at $450. We provide a free estimate so you know the cost before we begin.
Do I need a permit to replace my roof in Plain Dealing?
Roofing permits are commonly required for a full replacement or re-roof, and the requirements vary by jurisdiction. We recommend checking with the local building department to confirm the rules for your property. We can help guide you through the permit process as part of our service.
My neighbor's tree hangs over my property line and drops debris on my roof. Can I trim it?
In Louisiana, you generally have the right to trim branches that overhang your property line, but you should not damage the tree. It is best to discuss it with your neighbor first. If you are in an HOA, check the covenants for any rules about tree maintenance and roof debris.
Are you fully insured for roofing work in Plain Dealing?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Plain Dealing's climate?
In Plain Dealing, we recommend annual inspections to clear debris from valleys and gutters, especially after pine needle season. Check fasteners for tightness and look for any signs of rust or sealant wear. We offer metal roof inspections and maintenance services to keep your roof in good shape.
Why choose us?

Trusted professionals in Shreveport

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Shreveport

All your work handled by qualified professionals in Shreveport

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

227+ Verified Client Reviews in Shreveport

⭐⭐⭐⭐⭐ 4.9/5 · 227 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Shreveport · Response within 24h · No commitment · ☎ (318) 666-5827

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Shreveport ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm