Serving the Shreveport area  ·  (318) 666-5827  ·  Open Mon-Sun 7am-7pm
📞 (318) 666-5827 Free Quote

Metal Roofing in Shreveport, LA (71101) · Local Professionals

Shreveport Metal Roofing · Fast response in Shreveport and the Shreveport area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (318) 666-5827
+227Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Shreveport's older neighborhoods tell the story: deep porches in Highland, brick Colonials in Broadmoor, and ranch houses on live oak lined lots near Cross Lake. Those roofs take a beating from humid summers, spring hail, and the occasional ice storm, and the wrong roof shows it fast.

Homeowners in 71101 and across Shreveport call Shreveport Metal Roofing because we know how Red River clay, heavy pine and oak debris, and Ark-La-Tex storm seasons treat a roof. From the South Highlands to Southern Hills, we install, repair, and replace metal roofs built for this climate.

Metal Roofing in Shreveport (71101)

Shreveport sits on red clay and sandy loam among tall loblolly pines and live oaks, and that mix matters for roofing. Pine needles and sweetgum leaves collect in valleys and behind chimneys, holding moisture against panels and fasteners. Long humid summers feed algae streaks on north slopes, and spring supercells drop hail that dents older shingles and loosens fasteners. On the older Queen Anne and Craftsman homes in Highland and the South Highlands, steep pitches and deep porches mean careful staging and ladder work. In Broadmoor, Southern Hills, and Queensborough, 1920s to 1950s brick homes often have multiple roof planes and original flashing details that need attention. Across Bossier City, Eastwood, and the newer subdivisions around Benton, Haughton, and Blanchard, we see everything from architectural shingle tear-offs to standing seam and stone-coated steel retrofits. Tight lots near the Red River and downtown mean we plan material drops and dumpster placement carefully so we don't block alleys or damage landscaping.

Our team has worked roofs across Caddo and Bossier parishes, from historic districts to newer HOA neighborhoods. We know which panel profiles and colors fit the local look, and we handle the details that keep a metal roof watertight through heavy rain and summer heat.

Our services in Shreveport

How a Job Works in Shreveport

Step 1: Call us at (318) 666-5827 or request a free estimate. We schedule an on-site assessment, inspect the roof, attic, and flashing, and talk through options: repair, retrofit over existing shingles where code allows, or a full replacement. You get a written scope and price before any work starts.

Step 2: We pull the required roofing permit through the local building department and coordinate any historic district or HOA review. On tight lots in Highland or near Cross Lake, we stage materials to keep driveways and alleys clear. Our crews remove old roofing, inspect and repair decking, and install underlayment, panels, and flashing to manufacturer specs.

Step 3: We magnet-sweep for nails, haul away debris, and walk the property with you. We leave your yard and gutters clean and show you how the new roof and flashing look before we call the job done.

Metal roofing in Shreveport is priced by the square foot, and the range depends on the system and the condition of your roof. Corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, and standard metal roof installation around $8. Standing seam starts around $10 per square foot, and stone-coated steel or metal shingle systems start around $9. Copper and specialty metals start around $20. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or chimney repair around $600. Gutters for metal roofs start around $9 per linear foot. Factors that move the number include roof size and pitch, number of penetrations, decking condition, access, and how soon you need us out. Call (318) 666-5827 for a free estimate with real numbers for your property.

My Highland house has a steep Queen Anne roof with original details. Can you match a metal roof to that style?
Yes. We work on steep-pitch historic homes in Highland and the South Highlands regularly. We can recommend standing seam or metal shingle profiles that suit the architecture, and we coordinate with historic district review if your property is in a designated area. The goal is a roof that performs like metal and still looks right for the house.
A storm just lifted panels on my roof near Southern Hills. How fast can you respond?
Call (318) 666-5827 and we will schedule a storm damage inspection as soon as possible. We document the damage for your insurance claim, make temporary repairs to stop leaks, and provide a written estimate for permanent repairs or replacement. We never promise coverage, but we give you the photos and paperwork your adjuster needs.
What does a typical metal roof replacement cost for a 2,000 square foot ranch in Broadmoor?
Most ranch replacements fall in the $8 to $12 per square foot range depending on the system, tear-off, and decking condition, so a 2,000 square foot roof often lands between $16,000 and $24,000. Standing seam and stone-coated steel sit toward the upper end. We give you an exact price after inspecting the roof and attic.
Do I need a permit to re-roof my house in Shreveport?
Yes, roofing permits are commonly required for a full replacement or re-roof, and thresholds, fees, and inspection requirements vary by jurisdiction. We verify the rules with the local building department before work starts and pull the permit for you. You can also check the City of Shreveport website at https://www.shreveportla.gov/ for general information about permits and inspections.
My HOA requires approval for roof color. Can you help with that process?
We can provide product samples, manufacturer spec sheets, and color charts for your HOA submission. We also respect property line setbacks and coordinate with neighbors if staging or access crosses a line. If your subdivision near Benton or Haughton has design review, we build that timeline into the schedule so approval does not delay the install.
Are you insured for work on my Shreveport property?
Yes. We are fully insured with general liability and workers' compensation coverage. That protects you if anything goes wrong during the job.
What maintenance does a metal roof need in Shreveport's climate?
Keep pine needles, leaves, and sweetgum debris off the roof and out of valleys and gutters, especially after spring storms and in fall. Have fasteners and seals checked every few years, and wash off algae or mildew on shaded north slopes with a gentle cleaner. After hail or high wind, a quick inspection catches loose panels or lifted fasteners before they become leaks.

Nearby service areas

📍 Bossier City 71110📍 Benton 71006📍 Haughton 71037📍 Blanchard 71107
Why choose us?

Trusted professionals in Shreveport

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Shreveport

All your work handled by qualified professionals in Shreveport

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

227+ Verified Client Reviews in Shreveport

⭐⭐⭐⭐⭐ 4.9/5 · 227 verified Google reviews

Amanda K.
⭐⭐⭐⭐⭐
AK
Amanda K.
Shreveport

“Had these guys put a metal roof on our hangar out by the airpark and they knocked it out in three days. The crew of four kept the site spotless and even swept the apron before they left. Way sturdier than the old panels that were flapping in the wind.”

Commercial Metal Roofing
Sarah W.
⭐⭐⭐⭐⭐
SW
Sarah W.
Bossier City

“We wanted the porch roof redone without tearing off the old shingles, and they retrofitted it with standing seam panels in a single day. Honestly didn't expect it to look this sharp on a little porch.”

Metal Roof Over Shingles (Retrofit)
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Greenwood

“Our barn roof was rusting through over the pasture and I figured it was a lost cause. They replaced the corrugated panels and re-fastened everything, and now the whole barn looks brand new. Fair price too for how much roof there was.”

Agricultural Metal Roofing
Robert M.
⭐⭐⭐⭐
RM
Robert M.
Benton

“Went with standing seam on our brick house after getting three quotes, and Shreveport Metal Roofing was the only one that actually explained the flashing details. Two months in and it's been through some serious storms without a drop inside. Only knock is they started a day later than promised, but they more than made up for it.”

Standing Seam Metal Roofing
Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
Haughton

“Had a leak right around the vent pipe on our metal roof that two other guys couldn't figure out. These folks found it, redid the flashing and boot, and charged less than I expected. Been dry through every rain since.”

Metal Roof Leak Repair
James P.
⭐⭐⭐⭐⭐
JP
James P.
Blanchard

“Replaced the old metal roof on our place out in Blanchard and the cleanup was what impressed me most. You couldn't find a single screw or scrap in the yard when they finished, and the new panels look great.”

Metal Roof Replacement
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Stonewall

“We went with stone-coated steel on our brick home and I was nervous about the color, but the crew walked me through samples and the finished roof looks fantastic. Took about a week start to finish and they kept us posted every day.”

Stone-Coated Steel Roofing
Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
Mooringsport

“New construction on our brick house and we picked these guys for the gray metal roof. They coordinated with our builder without any headaches and the install was clean. Would use them again.”

Metal Roof Installation
Free Quote

Get Your Free Quote

Metal Roofing in Shreveport · Response within 24h · No commitment · ☎ (318) 666-5827

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Shreveport ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm